top of page

Castle Single Plate Wafer Check Valve

Castle Single Plate Wafer Check

Castle Wafer Type Check Valves are used in pipelines to prevent backflow of the fluid. These valves are fast-acting in closing, thereby maximizing protection to prevent the adverse effect of the back-flow. Opening and closing of the valve takes place at an extremely low-pressure difference over the valve disc. The connection of the eccentric disc shaft with the soft seat embedded in the body ensures a positive shut off of the returning medium.

Salient Features of Castle Wafer Type Check Valves are:

  • Wafer Type Check valve weighs much less as compared to the conventional flanged end Swing Check valves.

  • Due to short overall length it can be easily installed in horizontal or in vertical pipeline without any special pipe support.

  • The seat is fitted in the body in order to prevent contact with the flow, which results in longer life of the seat.

  • Our Wafer Type Check Valve has minimum head loss due to large size of the orifice. The Large orifice reduces head loose of the pump and thus saves energy.

  • Short face-to-face dimension of the valve makes it easy to install between standard gaskets and line flanges. Low Pressure drop

For Technical Details- 1

For Technical Details- 2

Product Range

  • SS body and SS flap: DN40 to DN600

  • CI body and SS flap: DN40 to DN600

  • CI body and MS/EN3 flap: DN250 to DN600

  • Pressure Rating: PN10 & PN16

Chat now on WhatsApp
bottom of page